Skip to content

HVAC contractors checked in 18 US metros

State license, years and address checked

No paid rankings

HVAC CompaniesHeatingCoolingFindan HVACapro

Homeowner guide

Reading an HVAC quote: SEER2, tonnage and Manual J

The three numbers on every quote and what a good installer measures first.

6 min readPublished by GC Digital

Two quotes for the same house can look very different. Three numbers make them comparable: the SEER2 rating, the tonnage and whether a Manual J load calculation was done.

SEER2

SEER2 is the cooling efficiency rating under the current federal test. Higher means lower running cost and a higher price. Make sure the rating is for the matched indoor and outdoor units together.

Tonnage

Tonnage is cooling capacity. One ton moves 12,000 BTU of heat per hour. Bigger is not better: an oversized system cycles on and off, wears faster and leaves the air damp.

Manual J

Manual J is the industry standard load calculation. It looks at windows, insulation, sun exposure and ducts, room by room. A contractor who sizes without one is guessing.

Also check what the quote includes: permit, removal of the old unit, new line set, thermostat, warranty terms and who registers the warranty with the manufacturer.